A Mitsubishi Electric OmniCore Multi Room Heat Pump System allows you to choose the perfect heat pump for each room with just one OmniCore outdoor unit. Whether it is a small capacity whisper quiet high wall for the bedroom, a compact floor console for the home office or a discreet ducted model for the lounge, there is a style and capacity to fit any room – the choice is truly yours.
Our extended OmniCore Multi Room Heat Pump Range now offers a wide selection of market-leading R32 refrigerant solutions.
Can one heat pump outside, heat multiple rooms inside?
The answer is yes!
While a standard heat pump system consists of a single indoor and outdoor unit, an OmniCore Multi Room Heat Pump System allows you to connect multiple indoor units to a single outdoor unit.
An OmniCore Multi Room Heat Pump System not only gives you the freedom to select the indoor model best suited to each and every room in your home, it also enhances exterior aesthetics by reducing the number of outdoor units required.
With an OmniCore Multi Room Heat Pump System you have the freedom to choose the ideal unit for each area of your home, keeping you comfortable without cluttering the exterior.
With Mitsubishi Electric Heat Pump Technology, you also get the benefit of superior efficiency and energy savings.
Only one outdoor unit
Choose from High Walls, Floor Consoles, Ducted or Cassettes
Energy efficient
From 1 to 8 room solutions
Whisper quiet
Optional Wi-Fi Control
Optional Zone Control
(Ducted indoors only)
Why Choose an OmniCore Multi Room System?
Style for Each and Every Room
With an OmniCore Multi Room Heat Pump System, you have the flexibility to choose the perfect indoor heat pump for each room. Whether it’s a small capacity whisper quiet high wall for the bedroom,
a compact floor console for the office or a discreet ducted model for the lounge, there is a style and capacity to fit any room – no matter the size or interior aesthetic.
Individual Temperature Control for Each Room
An OmniCore Multi Room System allows individual control of every heat pump in your home; whether you want to increase the temperature in the kids' bedrooms before bedtime, or turn off the living room
heat pump as you head out for dinner. With individual heat pump control, you can adjust the temperature to suit your comfort levels and ensure a heat pump is only operating when needed;
maximising energy savings.
Keep Your Exterior Clutter-Free
While a standard heat pump system requires a separate outdoor unit for every indoor unit inside the home, with OmniCore you only need one. An OmniCore Multi Room Heat Pump System is specifically designed so you have the flexibility
to connect multiple indoor units to just one outdoor unit. With a range that provides sizing options from two to eight rooms, a total home heating and cooling solution with a clutter-free exterior
is now possible.
Future-Proof and Add Units as Your Family Grows
With an OmniCore Multi Room System, there is no need to hurry and choose all the possible indoor units for your home at once. Indoor units do not have to be connected up all at the same time when you first install
the system. This means for example a four room system could be installed with only two indoor units connected to begin with; giving you the flexibility to add up to two more rooms in the future – all connected
to the one OmniCore outdoor unit. Forward planning means you do not end up with four large outdoor units cluttering up your exterior, which would be the case with a standard single room heat pump system.
What Indoor Units Can I Connect to my Multi Room Heat Pump System?
All of the Mitsubishi Electric indoor units listed within this brochure are compatible with a Mitsubishi Electric Multi Room outdoor unit.
High Wall Mounted
Choose from our wide range of high wall heat pumps. Designed for performance, Mitsubishi Electric High Wall Mounted Heat Pumps will save floor space and keep you comfortable year-round.
AP Series
The AP Series that features New Zealand’s quietest heat pump ever*, sets a new standard in whisper quiet, year-round comfort with advanced features such as Dual Barrier Coating that maximises energy efficient performance and options for either built-in*1 or optional Wi-Fi Control. And the AP15-20 New Zealand's smallest high walls ever*2 – perfect for above doorways and small home offices.
* AP25 indoor sound level on lowest fan setting in Heating Mode.
The Designer Series combines exceptional energy efficiency with award-winning aesthetics. The elegant slimline design is available in Glossy White, Matte Silver or Rich Black Diamond – so you can truly reflect your design personality.
The Black Diamond Series sets the new standard in personalised comfort and style. Available in three unique reflective colours; Red Diamond, White Diamond or Black Diamond. Packed with advanced features including Plasma Quad Plus Filtration, the 3D i-See Sensor for customised heating or cooling, and Dual Barrier Coating to maximise year-round energy efficient performance.
With their slimline design, our floor consoles are a great renovation option; fitting neatly into cavities left by the removal of fireplaces or night-store heaters.
RapidHeat KW Series
With a contemporary, slim-line design our RapidHeat Floor Consoles can be wall-recessed to dramatically reduced depth – the perfect solution for unobtrusive heating at floor level. Advanced sensors with Intuitive Control Logic Technology offer unparalleled low temperature heating performance in the shortest amount of time, all while maintaining maximum energy efficiency.
Our range of ceiling mounted units offer you the flexibility to keep your wall and floor space free without compromising on comfort.
MLZ Series
The MLZ Series with its streamlined design, airflow control features, and quiet
operation from just 26dBA, is ideal for small installation spaces where one-way
air distribution is needed.
Compact and ultra quiet, our range of ceiling cassette systems are equipped
with four-way airflow and cutting edge control. They offer you the flexibility to
keep your wall and floor space free without compromising on comfort.
The PLA Cassettes set a new benchmark in space heating. Featuring cutting edge airflow
and independent vane direction control, PLA Cassettes revolutionise flexibility, allowing you to keep your wall and floor space free without compromising on comfort.
A stylish, slimline indoor unit designed to provide comfort in large, open areas such as conference rooms or open plan offices – The Mitsubishi Electric Range of Ceiling Suspended indoor
units are designed to blend in seamlessly at ceiling height. With four speed settings and auto air-speed adjustment, the Ceiling Suspended PCA Series units are ideal for small and large areas
alike.
PCA Series
A stylish, slimline indoor unit designed to provide comfort in large, open areas such as conference rooms or open plan offices – Mitsubishi Electric's range of Ceiling Suspended indoor units are designed to blend in seamlessly at ceiling height. With four speed settings and auto air-speed adjustment, the Ceiling Suspended PCA Series units are ideal for small and large areas alike.
These concealed units are compact, whisper quiet and highly efficient. Our concealed units fit easily and discreetly into rooms with lowered ceilings.
SEZ Series
Compact, whisper quiet and highly efficient, our ceiling concealed SEZ Series units fit easily and discreetly into rooms with lowered ceilings. Optional fresh air intake provides all round refreshing comfort.
The unobtrusive PEAD Ducted Whole Home System is specifically designed for installations where ceiling space is minimal. The system is super energy efficient and whisper quiet.
With only its grilles visible, it is the perfect hidden comfort solution for heating or cooling multiple rooms at the same time.
PEAD Series
The unobtrusive PEAD Ducted Whole Home System is specifically designed for installations where ceiling space is minimal. The system is super energy efficient and whisper quiet. With only its grilles visible, it is the perfect hidden comfort solution for heating or cooling multiple rooms at the same time.
Will I Still Get the Fully Rated Capacity When Using an OmniCore Multi Room System?
OmniCore Multi Room outdoor units have different maximum capacities of heating kW and cooling kW. Depending on the indoor units chosen, the actual capacity of heating/cooling
produced by the indoor unit may vary from the actual rated capacity. This is because the power of the outdoor unit is distributed across all the connected indoor units that
are running.
For example, if you have an AP42 and an AP50 indoor unit connected to an MXZ-3F54VGD outdoor, when the two indoor units operate simultaneously in Heating Mode,
the AP42 will produce up to 3.1kW, and the AP50 will produce 3.7kW of its rated heating capacity. When only one indoor unit is running, for example the AP50, you will
receive up to an impressive 5.8kW of rated heating capacity from the AP50 alone.
How Many Indoor Units Can be Connected?
To help assist in your decision, all Mitsubishi Electric indoor units have a class rating; this is the numerical component of the model name. For example, the MSZ-AP25VG has a class rating of 25.
Every OmniCore Multi Room outdoor unit has three parameters that determine the number and size of indoor units that can be connected to it:
The number of indoor units that can be connected (ranging from 1–8 indoor units dependent on outdoor unit).
The maximum individual indoor class rating that can be connected (ranging from 15–100).
The maximum total class rating of all units that can be connected (ranging from 75–202 dependent on unit).
OmniCore Classic Multi Room - R32 Refrigerant Solutions
Each indoor can be up to a Class 50
Maximum Class total of 75 for all indoor units
Example:
The MXZ-2F52VF could have the following connected:
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-EF50VGK (class 50) high wall indoor unit
As each indoor unit has a maximum class no greater than 50, and the total maximum class combination of all indoors is no greater than 75 (in this case totalling 75).
Each indoor can be up to a Class 50
Maximum Class total of 100 for all indoor units
Example:
The MXZ-3F54VGD could have the following connected:
MSZ-EF42VGK (class 42) high wall indoor unit
MFXZ-LN50VG2 (class 50) high wall indoor unit
As each indoor unit has a maximum class no greater than 50, and the total maximum class combination of all indoors is no greater than 100 (in this case totalling 92).
Each indoor can be up to a Class 60
Maximum Class total of 125 for all indoor units
Example:
The MXZ-4F71VGD could have the following connected:
MSZ-EF25VGK (class 25) high wall indoor unit
MSZ-LN35VG2 (class 35) high wall indoor unit
MSZ-AP60VG (class 60) high wall indoor unit
As each indoor unit has a maximum class no greater than 60, and the total maximum class combination of all indoors is no greater than 125 (in this case totalling 120).
Each indoor can be up to a Class 71
Maximum Class total of 145 for all indoor units
This outdoor unit can only use 1x Class 71 indoor
Example:
The MXZ-4F80VGD could have the following connected:
MSZ-AP15VG (class 15) high wall indoor unit
MSZ-LN25VG2 (class 25) high wall indoor unit
MSZ-EF25VGK (class 25) high wall indoor unit
MSZ-AP71VG (class 71) high wall indoor unit
As each indoor unit has a maximum class no greater than 71, and the total maximum class combination of all indoors is no greater than 145 (in this case totalling 136).
*At least 2 indoor units must be connected when using indoor unit with capacity lower than 25 class.
Each indoor can be up to a Class 71
Maximum Class total of 171 for all indoor units
This outdoor unit can only use 1x PEAD-M71
Example:
The MXZ-5F100VGD could have the following connected:
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-EF25VGK (class 25) high wall indoor unit
MSZ-EF25VGK (class 25) high wall indoor unit
PEAD-M71JAA (class 71) ducted indoor unit
As each indoor unit has a maximum class no greater than 71, and the total maximum class combination of all indoors is no greater than 171 (in this case totalling 171).
*At least 2 indoor units must be connected when using indoor unit with capacity lower than 25 class.
Each indoor can be up to Class 80
Maximum Class total of 180 for all indoor units
This outdoor unit can only use 1x PEAD-M71
Example:
The MXZ-6F120VGD could have the following connected:
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-EF25VGK (class 25) high wall indoor unit
MFXZ-KW50VG (class 50) floor console indoor unit
MSZ-AP80VG (class 80) high wall indoor unit
As each indoor unit has a maximum class no greater than 80, and the total maximum class combination of all indoors is no greater than 180 (in this case totalling 180).
*At least 2 indoor units must be connected when using indoor unit with capacity lower than 25 class.
OmniCore Power Multi Room - R410A Refrigerant Solutions
Each indoor can be up to Class 100*
Maximum Class total of 117 for all indoor units
*To maximise use of available capacity, indoor units over Class 71 are not recommended to be connected to the PUMY-SP80
Example:
The PUMY-SP80VKMD-A could have the following connected via the PAC-MK34BC 3-way Branch Box:
MSZ-AP15VG (class 15) high wall indoor unit
MSZ-EF22VGK (class 22) high wall indoor unit
PEAD-M71JAA(class 71) ducted indoor unit
As each indoor unit has a maximum class no greater than 80, and the total maximum class combination of all indoors is no greater than 117 (in this case totalling 108).
Each indoor can be up to Class 100
Maximum Class total of 162 for all indoor units
Example:
The PUMY-SP112VKMD-A could have the following connected via the PAC-MK34BC 3-way Branch Box:
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-EF35VGK (class 35) high wall indoor unit
PEAD-M100JAA(class 100) ducted indoor unit
As each indoor unit has a maximum class no greater than 100, and the total maximum class combination of all indoors is no greater than 162 (in this case totalling 160).
Each indoor can be up to Class 100
Maximum Class total of 182 for all indoor units
Example:
The PUMY-SP125VKMD-A could have the following connected via the PAC-MK54BC 5-way Branch Box:
MSZ-AP15VG (class 15) high wall indoor unit
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-EF35VGK (class 35) high wall indoor unit
PEAD-M100JAA(class 100) ducted indoor unit
As each indoor unit has a maximum class no greater than 100, and the total maximum class combination of all indoors is no greater than 182 (in this case totalling 175).
Each indoor can be up to Class 100
Maximum Class total of 202 for all indoor units
Example:
The PUMY-SP140VKMD-A could have the following connected via the PAC-MK54BC 5-way Branch Box:
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-AP25VG (class 25) high wall indoor unit
MSZ-EF25VGK(class 25) high wall indoor unit
MSZ-EF25VGK (class 25) high wall indoor unit
PEAD-M100JAA(class 100) ducted indoor unit
As each indoor unit has a maximum class no greater than 100, and the total maximum class combination of all indoors is no greater than 202 (in this case totalling 200).