Eight Port 14.0kW OmniCore Power Multi Outdoor Unit
8 Port System
The Eight Port 14.0kW OmniCore Power Multi outdoor unit allows you to connect 2-8 indoor units, up to a Class 100, with a maximum total Class of 182. Choose the indoor unit best suited to each room’s style and size, and keep your home’s exterior looking neat with only one OmniCore Multi Room outdoor unit.
Connect multiple indoor units to a single outdoor unit.
This system gives you the freedom to select the indoor model best suited to each and every room in your home. Multi-Split Systems are
designed to allow multiple indoor units of varying capacity and type to be connected to just one outdoor unit, enhancing exterior aesthetics by reducing the
number of outdoor units required.
If more than one room requires heating and cooling, a Multi-Split system may be right for you. This system allows the indoor units chosen to reflect the specific needs of each room. For
example, a whisper-quiet high wall could be selected for a bedroom, while a floor console could be used to replace a fireplace in the living room. The indoor units selected will be powered by just
one outdoor unit, lowering the overall capital cost and increasing the energy efficiencies achieved.
Connectable Indoor Unit Types.
Every home is different, and with so many options to choose from it is important to consider each individual room’s requirements as part of the
overall OmniCore Multi Room system.
Use the following to learn more about the different indoor unit types available, as well as controller options. This information can then
be used to base your preferred selection of indoor units and control systems that best suit your home.
The outdoor unit is connected up to a specially designed Branch Box. This Branch Box is like the technological heart of the Mitsubishi Electric Multi Room. It intelligently draws energy from the outdoor unit and directs the flow of energy through its individual branch ports to the different connected indoor components.
The AP Series that features New Zealand’s quietest heat pump ever*, sets a new standard in whisper quiet, year-round comfort with advanced features such as Dual Barrier Coating that maximises energy efficient performance and options for either built-in*1 or optional Wi-Fi Control. And the AP15-20 New Zealand's smallest high walls ever*2 – perfect for above doorways and small home offices.
* AP25 indoor sound level on lowest fan setting in Heating Mode.
*1 AP15-20 Wi-Fi Control optional only.
*2 Indoor unit total volume size of 0.034m3.
The Designer Series combines exceptional energy efficiency with award-winning aesthetics. The elegant slimline design is available in Pure White, Matte Silver or Rich Black Diamond – so you can truly reflect your design personality.
The Black Diamond Series sets the new standard in personalised comfort and style. Available in three unique reflective colours; Red Diamond, White Diamond or Black Diamond. Packed with advanced features including Plasma Quad Plus Filtration, the 3D i-See Sensor for customised heating or cooling, and Dual Barrier Coating to maximise year-round energy efficient performance.
The body is concealed in the perimeter cover for a cohesive fit with the interior. The compact body depth of 220mm and can easily be installed in a perimeter zone. Additional external static pressure capacity provides flexibility for duct extension, branching, and air outlet configuration. The ability to add ducting allows for a wide range of installation possibilities.
The V-shaped design of the heat exchanger has allowed us to reduce the depth to just 450mm, while the thin body height of just 200mm allows for installation in tight spaces such as above built-in wardrobes.
The compact PEFY VMX series allows flexible installation options with three easily changeable air inlet positions. The range features the added flexibility of a selection of changeable static pressures.
Compact, whisper quiet and highly efficient, our ceiling concealed SEZ Series units fit easily and discreetly into rooms with lowered ceilings. Optional fresh air intake provides all round refreshing comfort.
Slim design with a height of no more than 250mm enables installation in ceilings with a small cavity.
Five-stage external static pressure settings provide flexibility for duct extension, branching and air outlet configuration and are adjustable
The unobtrusive PEAD Ducted Whole Home System is specifically designed for installations where ceiling space is minimal. The system is super energy efficient and whisper quiet. With only its grilles visible, it is the perfect hidden comfort solution for heating or cooling multiple rooms at the same time.
Compact and ultra quiet, our range of ceiling cassette systems are equipped
with four-way airflow and cutting edge control. They offer you the flexibility to
keep your wall and floor space free without compromising on comfort.
The PLA Cassettes set a new benchmark in space heating. Featuring cutting edge airflow
and independent vane direction control, PLA Cassettes revolutionise flexibility, allowing you to keep your wall and floor space free without compromising on comfort.
A stylish, slimline indoor unit designed to provide comfort in large, open areas such as conference rooms or open plan offices – Mitsubishi Electric's range of Ceiling Suspended indoor units are designed to blend in seamlessly at ceiling height. With four speed settings and auto air-speed adjustment, the Ceiling Suspended PCA Series units are ideal for small and large areas alike.
3-way Branch Box for PUMY-SP112-140 Power Multi system. Allows connection of 3 (three) indoor units. (WxDxH, mm): 450 x 280 x 170. Liquid / Gas Pipe (OD, mm): Main (from outdoor) 9.52 / 15.88; Branch (to indoors) 3x 6.35 / 3x 9.52. Weight: 6.7kg. Note: You can connect 1x PAC-MK53BC and 1x PAC-MK33BC Branch Boxes to a Power Multi system for a combination of 8 indoor units. When connecting 2x Branch Boxes you will need to use the MSDD-50BR-E (for brazing) or MSDD-50AR-E (for flare joints) Multi Branch Distribution Pipe Joiner.
5-way Branch Box for PUMY-SP112-140 Power Multi system. Allows connection of 5 (five) indoor units. (WxDxH, mm): 450 x 280 x 170. Liquid / Gas Pipe (OD, mm): Main (from outdoor) 9.52 / 15.88; Branch (to indoors) 5x 6.35 / 4x 9.52 + 1x 12.7. Weight: 7.4kg. Note: You can connect 1x PAC-MK53BC and 1x PAC-MK33BC Branch Boxes to a Power Multi system for a combination of 8 indoor units. When connecting 2x Branch Boxes you will need to use the MSDD-50BR-E (for brazing) or MSDD-50AR-E (for flare joints) Multi Branch Distribution Pipe Joiner.