From the user standpoint, the biggest advantage is fast drying time. Compared with the 30 to 40 seconds required by typical air dryers, the Jet Towel hand dryer reduces the time to 9-15 seconds.
Once up and running, you will notice significant cost savings with the Jet Towel. For example, a restroom that is used 400 times in a day, will save an estimated $3,764 annually. The more it’s used, the greater the savings.
Since there is absolutely no contact with the hands, Jet Towel usage is very sanitary, and because no paper waste is generated, it offers the added benefit of keeping the washroom environment clean and tidy.
With the Jet Towel, paper waste is completely eliminated, meaning fewer natural resources consumed. This new and cutting-edge product reflects positively on facility operations.
Water from your hands is collected in the unit’s drain tank, keeping the floors clean and dry. With no more towel dispensers requiring refills, there’s no more paper waste to pile up. The Jet Towel is designed for ease of maintenance.
At first glance, you immediately notice the stylish design of the Jet Towel. This design adds a ‘wow’ factor to almost any restroom.
The Jet Towel reduces drying time in two ways: First, the Jet Towel blows high velocity air onto both sides of the hands simultaneously, reducing the overall drying time. Secondly, hands are inserted flat into the Jet Towel ensuring that the maximum surface area is dried quicker.
Product life is determined by motor operation. Assuming use at an average rate of 400 times a day, this would give the Jet Towel a life expectancy of at least seven years.
The Jet Towel hand dryer is provided with explanatory stickers that provide simple instructions for first-time users.
To prevent potential abuse or misuse, the Jet Towel hand dryer incorporates a built-in timer that automatically halts operation after 30 seconds. Once the hands are removed, the unit resets and resumes normal operation.
Absolutely. The Jet Towel hand dryer is easy to access for people with disabilities, and has the additional bonus of keeping the floors dry.
No, the unit requires direct wiring.
The Jet Towel hand dryer design presumes use at ordinary room temperatures. If the unit is to be utilized at a location with higher than normal temperatures, it is advised that the necessary wiring precautions be taken. In general, the unit should not be used in any area where the temperature regularly exceeds 40 degrees Celsius
Extra reinforcement isn’t required for installation, but in the case of mounting on concrete walls, metal, or wood, screw plugs are advisable.
The JT-SB216JSH, set to the “High” position, produces approximately 61dB of noise, or about the same level as existing hand dryers. But since warm air-type hand dryers operate considerably longer (30-40 seconds) than the 9-15 seconds needed for the Jet Towel, overall noise exposure is reduced.