Third Party Cylinder via Hydrobox for Ecodan ATW Hydronic and Split Units THIRD PARTY CYLINDERS We offer a range of New Zealand made hot water cylinders manufactured to the highest standards, complete with a heat exchanger coil designed specifically for Mitsubishi Electric Hot Water Heat Pump Hydrobox Systems. Cylinders are supplied as standard with all water connections on the front and include standard electric element, thermostat and TPR valve. Sensor pockets are correctly positioned for the cylinder temperature sensor. There are sizes for mains pressure cylinders or buffer tanks and these can be made up to 800 litres. HOT WATER AND HEATING CONTROL WITH THIRD PARTY HEAT EXCHANGER For hot water and heating systems that require integrating separate heat exchangers with our range of outdoor units can easily be applied using the FTC5, FTC6 or FTC2B Interface Controllers. The FTC2B Controller has the ability to connect to third party BMS and home automation with a series of simple hardwired controls. PAC-IF061B-E PAC-IF032B-E PAC-IF071B-E FTC2B PAC-IF032B-E DIMENSIONS Width [mm] 336 Depth [mm] 69 Height [mm] 278 WEIGHT [kg] 2.4 ELECTRICAL DATA Electrical Supply Powered by Outdoor Unit 1Ph, 230V, 50Hz FTC6 PAC-IF071B-E DIMENSIONS Width [mm] 393 Depth [mm] 86.7 Height [mm] 422 WEIGHT [kg] 3.7 ELECTRICAL DATA Electrical Supply Powered by Outdoor Unit 1Ph, 230V, 50Hz FTC5 PAC-IF061B-E DIMENSIONS Width [mm] 393 Depth [mm] 86.7 Height [mm] 422 WEIGHT [kg] 4.0 ELECTRICAL DATA Electrical Supply Powered by Outdoor Unit 1Ph, 230V, 50Hz Ecodan Hydrobox System Underfloor Heating Radiator Hot Water Three-Way Valve Indoor Hydrobox Outdoor ATW Hydronic/Split PUHZ Field Supplied Third Party Cylinder 14
RkJQdWJsaXNoZXIy MTg0ODUyNA==