90° rotation 90° rotation 90° rotation 5 sec measurement 5 sec measurement 5 sec measurement 5 sec measurement * The sensor rotates 360° once every two minutes when there is significant temperature disparity and once every five minutes when a stable, even temperature has been reached. 360° Temperature Monitoring The 3D i-See Sensor is an infrared-based sensor that monitors floor-level temperatures throughout the room. The 3D i-See Sensor works to ensure even temperature distribution and maximise room comfort through 360° sensing that covers the whole floor space; giving a more accurate and even temperature reading and improving energy efficiency. 3D i-See Sensor Operation The 3D i-See Sensor rotates 90° every two minutes*, taking five second measurements at each position to accurately determine floor-level temperatures on all sides of the room. The 3D i-See Sensor calculates the temperature by measuring the infrared rays emanating from the walls and floors. Detects Number of People The 3D i-See Sensor detects the number of people in the room and adjusts the power accordingly. This makes automatic power-saving operation possible in places where the number of people changes frequently. Additionally, when the area is continuously unoccupied, the system switches to a more enhanced power-saving mode. Depending on the setting, it can also stop the operation. Detects People’s Position Once a person is detected, the angle of the vane is automatically adjusted. Each vane can be independently set by the user to “Direct Airflow” or “Indirect Airflow”. Highly Accurate Occupancy Detection A total of eight sensors rotate a full 360°, in three minute intervals. In addition to detecting human body temperature, the 3D i-See Sensor detects the number of people and their positions. Even Airflow – Airflow Only Where You Need It With Even Airflow Mode, the 3D i-See Sensor memorises people’s movements and furniture positions, efficiently distributing airflow only to where it is needed. No Occupancy Modes – for Energy Savings The 3D i-See Sensor detects whether or not there are people in the room, and automatically switches to one of the No Occupancy Modes, as set by the user. In No Occupancy Energy Saving Mode when no one is in the room, the unit automatically reduces power consumption by approximately 10% after ten minutes, and 20% after 60 minutes. In No Occupancy Auto-Off Mode, when no one is in the room, the unit turns off automatically. Advanced Feature 3D i-See Sensor – PLA and SLZ Cassette Series 8 Sensors Detects number of people Detects people’s position 19
RkJQdWJsaXNoZXIy MTg0ODUyNA==